Item Description:
----------------
GASKET, RING JOINT, OVAL, SOF\T IRON, R 45
Item Spec QTY: 27 PCS
NOUN GASKET
TYPE RING JOINT
DESIGN STD ANSI B16.20 OR APY SPEC 6A
RING TYPE R
CROSS SECTION OVAL
MATERIAL SOFT IRON
MATERIAL STANDARD ANSI B16.20 OR API SPEC 6A
TEST/ INSP/ CERTIFICATION etc. AS DETAILED AT THE END
RING NO. R 45
FOR FLANGE SIZE INCH 6
ACCEPTABLE EQUIVALENT(MFR) LAMOS, USA; MOORSIDE
MACHINING CO. LTD, UK; SEVAL, ITALY AND
S.S.G LTD, UK
Item Description:
----------------
GASKET, RING JOINT, SOFT IRON, BX 152, T41-374
Item Spec QTY: 25 PCS
NOUN GASKET
TYPE RING JOINT
DESIGN STD ANSI B16.20 OR API SPEC 6A
RING TYPE BX PRESSURE ENERGISED
MATERIAL SOFT IRON
MATERIAL STANDARD ANSI B16.20 OR API SPEC 6A
RING NO. BX 152
FOR FLANGE SIZE INCH 2 1/16
Item Description:
-----------------
GASKET, RING JOINT, OCTAGONAL, 316 SS, R 32
Item Spec QTY: 7 PCS
NOUN GASKET
TYPE RING JOINT
CHEMICAL COMPOSITION 18CR-10NI-2MO
DESIGN STD API SPEC 6A
RING TYPE R
CROSS SECTION OCTAGONAL
MATERIAL 316 SS
MATERIAL STANDARD ASTM A182-F916
RING NO R 32
FOR FLANGE SIZE INCH 3
ACCEPTABLE EQUIVALENT(MFR) LAMOS, USA; MOORSIDE MACHINING CO LTD., UK; SEVAL, ITALY AND S.S.G LTD, UK
Item Description:
----------------
GASKET, SPIRAL WOUND, 316L SS, EXP GRAPHITE FILLER,
FOR 24 IN CL 300 RF FLG
Item Spec QTY: 15 PCS
NOUN GASKET
TYPE SPIRAL WOUND
DESIGN STD BS 3381
MATERIAL CENTRING RING CARBON STEEL
MATERIAL STD CENTRING RING ASTM A 285 – GRADE C
M ATERIAL WINDING 316L
MATERIAL STD WINDING ASTM A240
MATERIAL FILLER EXFOLIATED EXPANDED GRAPHITE
TEMP RANGE -200 TO +400 DEG C
FOR FLANGE RATING ANSICLASS 300
FOR FLANGE FINISH RAISED FACE
FOR FLANGE STD ANSI B16.5 OR BS 1560
NOM PIPE SIZE INCH 24
THICKNESS GASKET 4.5 MM
THINKNESS CENTERING RING 3.2 MM
Item Description:
----------------
GASKET, SPIRAL WOUND, 316L SS, EXP GRAPHITE FILLER, FOR 8 IN CL 1500 RF FLANGE
Item Spec QTY: 70 PCS
NOUN GASKET
TYPE SPIRAL WOUND
DESIGN STD BS 3381
MATERIAL CENTRING RING CARBON STEEL
MATERIAL STD CENTERING RING ASTM A285 – GRADE C
MATERIAL INNER RING 316 L
MATERIAL WINDING ASTM A240
MATERIAL FILLER EXPLOIATED EXPANDED GRAPHITE
TEMP RANGE -200 TO +400 DEG C
FOR FLANGE RATING ANSCLASS 1500
FOR FLANGE FINISH RAISED FACE
FOR FLANGE STD ANSI B16.5 OR BS 1560
NOM PIPE SIZE INCH 8
ADDITIONAL REQUIREMENTS SPEC 85/103
TEST/INSP/ CERTIFICATION REFER TO ITEM CERTIFICATION AT THE END.
THICKNESS GASKET 4.5 MM
THICKNESS CENTRING RING 3.2 MM
THICKNESS INNER RING 3.2 MM
Item Description
----------------
GASKET, SPIRAL WOUND, 316 SS, GRAPH FILLER, FOR 24 IN CL 600 RF FLG
Item Spec QTY: 20 PCS
NOUN GASKET
TYPE SPIRAL WOUND
DESIGN STD API 601 OR BS 3381
MATERIAL CENTRING RING CARBON STEEL
MATERIAL WINDING 316 SS
MATERIAL STD WINDING ASTM A240 TYPE 316 L
MATERIAL FILLER EXFOLIATED EXPANDED GRAPHITE
FOR FLANGE RATING ANSICLASS 600
FRO FLANGE FINISH RAISED FACE
FOR FLANGE STD ANSI B16.5 OR BS 1560
NOM PIPE SIZE INCH 24
ADDITIONAL REQUIREMENTS FILLER MATERIAL SURABLE FOR USE WITH OIL, WATER, STEAM, AIR AND
Item Description:
----------------
NUT, HEX, CS, UNC, ¾ IN
Item Spec QTY: 20 PCS
NOUN NUT
TYPE HEXAGON
FEATURES FINISHED
DIMENSIONAL STD ANSI B18.2.2 OR BS 1768
THREAD TYPE UNC
THREAD STD ANSI B1.1 OR BS 1580 – CLASS 2B
MATERIAL CARBON STEEL
MATERIAL STANDARD ASTM A 307 – GRADE A OR BS 1768
GRADE A
NOW SIZE IN INCH ¾
Item Description:
----------------
SHEET, PRESSED CORK, 1/8 IN, 900 MM, 1200 MM
Item Spec Qty: 10 Pcs
NOUN SHEET
MATERIAL PRESSED CORK
TEMP RATING SERVICE TEMPERATURE RANGE MINUS
30 DEG C. TO PLUS 160 DEG. C.
FEATURES SYNTHETIC RUBBERS BONDED – RESILENT – OIL AND GASOLINE
RESISTANT
THICKNESS INCH 1/8
WIDTH 900 MM
LENGTH 1200 MM
ACCEPTABLE EQUIVALENT 1. J. WALKER, NEBAR STANDARDGRADE; 2. KLINGER FLEX NE32, 3. SSQ-UK
Item Description:
-----------------
GASKET, RING JOINT, INCOLOY 825, RX 54
Item Spec QTY: 5 PCS
NOUN GASKET
TYPE RING JOINT
DESIGN STD API SPEC 6A
RING TYPE RX PRESSURE ENERGISED
MATERIAL INCOLOY 825
MATERIAL STANDARD ASTM B425; OR UNS NO8625
HARDNESS MAX BRINELL 160 OR ROCKWELL B 83 MAX
RING NO RX 54
FOR FLANGE SIZE INCH 11
ACCEPTABLE TABLE EQUIVALENT(MFR) LAMOS, USA; MOORSIDE MACHINING CO LTD, UK; SEVAL, ITALY AND S.S.G LTD, UK
Item Description:
----------------
JOINTING, CNAF, 1000 MM, 1500 MM, 1.5 MM
Item Spec QTY: 10 PCS
NOUN JOINTING
MATERIAL COMPRESSED NON-ASBESTOS FIBRE
MATERIAL FEATURE OIL RESISTANT, NON-METALLIC
WIDTH 1000 MM
LENGTH 1500 MM
THICKNESS 1.5 MM
ACCEPTABLE EQUIVALENT(MFR) SIZE: 1500 * 1500 MM
For More Info Please Contact:
Thomas george
02 6744632
">
TRADE DIRECTORY ( Div of Marathe
Infotech Pvt.Ltd.)
An ISO 9001:2008 Certified Company
